.IDEAS.BoundaryConditions.Interfaces.PartialSimInfoManager

Information

Revisions

• July 9, 2025, by Jelger Jansen:
  Update wind speed modifier calculation according to ASHRAE2005 and change the default local terrain type to unshielded. See #1340.
• October 30, 2024, by Klaas De Jonge:
  Modifications for wind pressure,ambient pressure and wind speed modifiers used in interzonal airflow.
• October 18, 2023 by Filip Jorissen:
  Added use_port_1 and use_port_2 for convenience.
• December 18, 2022 by Filip Jorissen:
  parameter revisions for #1244.
• April 28, 2022 by Filip Jorissen:
  Changed the default weather file to BEL_VLG_Uccle.064470_TMYx.2007-2021.mos. See #1239 for more details.
• August 10, 2020, by Filip Jorissen:
  Modifications for supporting interzonal airflow. See #1066
• April 16, 2021 by Filip Jorissen:
  Changed the default weather file to Brussels.mos. See #1209 for more details.
• June 30, 2020 by Filip Jorissen:
  Overridable assignments of variables of PartialSimInfoManager. See #1148
• November 28, 2019 by Ian Beausoleil-Morrison:
  Remove calculation of convection coefficient at exterior surfaces as this has been moved to a new model. Also, removed this coefficient from WeaBus as it is not surface-dependent.
  Make wind direction available on weather bus as this is required for new convection model. See #1089
• October 9, 2019 by Josué Borrajo Bastero:
  Added button to select the weather file graphically.
• January 25, 2019 by Filip Jorissen:
  Corrected molar mass fraction for consistency. See #1004.
• April 10, 2019 by Filip Jorissen:
  Avoided redundant consistent initial equation for Etot. See #971.
• July 27, 2018 by Filip Jorissen:
  Added outputs CEnv and X_wEnv to weaDatBus. See #868.
• June 21, 2018, by Damien Picard:
  Reduce the icon size of weaBus to something very small such that users would not try to connect to it. Rename and make public the connector weaDatBus such that it can be connected to models from the Buildings library.
• June 12, 2018, by Filip Jorissen:
  Refactored implementation such that we use more computations from the weather data reader instead of computing them ourself using equations.
• June 11, 2018, by Filip Jorissen:
  Revised implementation such that longitude, latitude and time zone are read from the TMY3 weather file. Removed split between file path and file name to avoid confusion and incorrectly formatted paths.
• June 11, 2018, by Filip Jorissen:
  Changed table name of TMY3 file from 'data' to IBPSA final default 'tab1' for issue #808.
• June 8, 2018, by Filip Jorissen:
  Moved input TMY3 file. See issue #821.
• June 7, 2018 by Filip Jorissen:
  Created 'input' for TSky, Va and Fc such that they can be overwriten from the extends clause. This is for #838.
• March 27, 2018, by Filip Jorissen:
  Added relative humidity to weather bus. See issue #780.
• January 26, 2018, by Filip Jorissen:
  Added floor orientation to set of precomputed boundary conditions. See issue #764.
• January 21, 2018 by Filip Jorissen:
  Added solTim connections for revised azimuth computations. See #753.
• March 21, 2017, by Filip Jorissen:
  Changed linearisation implementation for JModelica compatibility. See issue #559.
• January 10, 2017 by Filip Jorissen:
  Set linExtRad = false and added new parameter linExtRadWin = true since only for windows is it necessary that linExtRad is true. See #615.
• September 22, 2016 by Filip Jorissen:
  Reworked implementation such that we use Annex 60 baseclasses for boundary condition computations.
• March 25, 2016 by Filip Jorissen:
  Reworked radSol implementation to use RealInputs instead of weaBus. This simplifies translation and interpretation. Also cleaned up connections.
• January 29, 2015, Filip Jorissen:
  Made changes for allowing a proper implementation of airLeakage.
• June 14, 2015, Filip Jorissen:
  Adjusted implementation for computing conservation of energy.
• February 10, 2015 by Filip Jorissen:
  Adjusted implementation for grouping of solar calculations.